arduino-project-builder

Included with Lifetime

$97 forever

Build complete, production-ready Arduino projects (environmental monitors, robot controllers, IoT devices, automation systems). Assembles multi-component systems combining sensors, actuators, communication protocols, state machines, data logging, and power management. Supports Arduino UNO, ESP32, and Raspberry Pi Pico with board-specific optimizations. Use this skill when users request complete Arduino applications, not just code snippets.

Designscriptsassets

What this skill does


# Arduino Project Builder

Assemble complete, working Arduino projects from requirements. This skill combines multiple patterns (sensors, actuators, state machines, logging, communication) into cohesive systems.

## Quick Start

**List available project types:**
```bash
uv run --no-project scripts/scaffold_project.py --list
```

**Create a complete project:**
```bash
uv run --no-project scripts/scaffold_project.py --type environmental --board esp32 --name "WeatherStation"
uv run --no-project scripts/scaffold_project.py --type robot --board uno --output ./my-robot
```

**Interactive mode:**
```bash
uv run --no-project scripts/scaffold_project.py --interactive
```

## Resources

- **examples/** - Complete project examples (environmental monitor, robot controller, IoT device)
- **scripts/scaffold_project.py** - CLI tool for project scaffolding (config.h, main.ino, platformio.ini, README)
- **assets/workflow.mmd** - Mermaid diagram of project assembly workflow

## Supported Project Types

### Environmental Monitors
Multi-sensor data loggers (temperature, humidity, light, air quality)

See [Environmental Monitor Example](examples/project-environmental-monitor.md)

### Robot Controllers
Motor control, sensor fusion, obstacle avoidance, state machines

See [Robot Controller Example](examples/project-robot-controller.md)

### IoT Devices
WiFi/MQTT data transmission, cloud integration, remote monitoring

See [IoT Device Example](examples/project-iot-device.md)

### Home Automation
Relay control, scheduled tasks, sensor-triggered actions

### Data Acquisition Systems
High-frequency sampling, SD card logging, real-time visualization

## Project Assembly Workflow

- [ ] **[Requirements Gathering](workflow/step1-requirements-gathering.md)** - Analyze user request and gather project specifications
- [ ] **[Architecture Design](workflow/step2-architecture-design.md)** - Design component connections, data flow, and state machines
- [ ] **[Code Assembly](workflow/step3-code-assembly.md)** - Combine patterns and customize for user hardware
- [ ] **[Testing & Validation](workflow/step4-testing-validation.md)** - Verify compilation, memory usage, and functionality
- [ ] **[Documentation](workflow/step5-documentation.md)** - Create wiring diagrams, usage instructions, and troubleshooting guides

## Quality Standards & Rules

- [ ] **[Quality Standards](rules/quality-standards.md)** - Hardware abstraction, non-blocking code, error handling, and memory safety requirements
- [ ] **[Integration Checklist](rules/integration-checklist.md)** - Pre-delivery verification for sensor validation, timing, and reliability
- [ ] **[Board Considerations](rules/board-considerations.md)** - UNO, ESP32, and RP2040 specific optimizations and constraints

## Project Output Template

- [ ] **[Output Template](templates/project-output-template.md)** - Standardized format for delivering complete Arduino projects

## Resources

- **examples/** - Complete project examples with full implementations
- **scripts/scaffold_project.py** - CLI tool for project scaffolding with config.h, main.ino, platformio.ini, README
- **assets/workflow.mmd** - Mermaid diagram of project assembly workflow
- **workflow/** - Step-by-step project assembly process
- **rules/** - Quality standards and board-specific optimizations
- **templates/** - Project output templates and documentation standards

Files: 19

Size: 98.6 KB

Complexity: 89/100

Category: Design

Source: https://github.com/wedsamuel1230/arduino-skills/tree/main/skills/arduino-project-builder

Related in Design

contribute

Included

Local-only OSS contribution command center. Auto-refreshes the user's in-flight PR and issue state on invoke so conversations start with full context — no need to brief Claude on what's in flight. Helps the user find issues to contribute to on GitHub, builds per-repo dossiers of what each upstream expects (CLA, DCO, branch convention, AI policy, draft-first, review bots, issue templates), runs deterministic gates before any external action so AI-assisted contributions don't reach maintainers as slop. State is markdown-only: candidate files at ~/.contribute-system/candidates/, repo dossiers at ~/.contribute-system/research/, append-only event log at ~/.contribute-system/log.jsonl. No database, no cloud calls. Use when the user asks about their PRs / issues / contributions, wants to find new work to take on, claim an issue, build/refresh a repo's dossier, or draft a Design Issue or PR. Trigger with "/contribute", "what's my PR status", "find a contribution", "claim issue X", "draft a Design Issue for Y", "refresh dossier for Z".

Designscripts

architectural-analysis

Included

User-triggered deep architectural analysis of a codebase or scoped subtree across eight modes — information architecture, data flow, integration points, UI surfaces, interaction patterns, data model, control flow, and failure modes. This skill should be used when the user asks to "diagram this codebase," "map the architecture," "show the data flow," "give me an ERD," "trace control flow," "find the integration points," "verify the layout pattern," "audit the UX architecture," or any similar request whose primary deliverable is mermaid diagrams plus cited reports under docs/architecture/. Dispatches haiku/sonnet sub-agents in parallel for per-mode exploration, then verifies every citation mechanically before any node lands in a diagram. Not for one-off prose explanations of code (use code-explanation) or for high-level system design from scratch (use system-design).

Designscripts

mcp

Included

Model Context Protocol (MCP) server development and tool management. Languages: Python, TypeScript. Capabilities: build MCP servers, integrate external APIs, discover/execute MCP tools, manage multi-server configs, design agent-centric tools. Actions: create, build, integrate, discover, execute, configure MCP servers/tools. Keywords: MCP, Model Context Protocol, MCP server, MCP tool, stdio transport, SSE transport, tool discovery, resource provider, prompt template, external API integration, Gemini CLI MCP, Claude MCP, agent tools, tool execution, server config. Use when: building MCP servers, integrating external APIs as MCP tools, discovering available MCP tools, executing MCP capabilities, configuring multi-server setups, designing tools for AI agents.

Designscripts

react-native-skia

Included

Design, build, debug, and optimise high-polish animated graphics in React Native or Expo using @shopify/react-native-skia, Reanimated, and Gesture Handler. Use when the user wants canvas-driven UI, shaders, paths, rich text, image filters, sprite fields, Skottie, video frames, snapshots, web CanvasKit setup, or performance tuning for custom motion-heavy elements such as loaders, hero art, cards, charts, progress indicators, particle systems, or gesture-driven surfaces. Also use when the user asks for fluid, glow, glass, blob, parallax, 60fps/120fps, or GPU-friendly animated effects in React Native, even if they do not explicitly say "Skia". Do not use for ordinary form/layout work with standard views.

Designscripts

plaid

Included

Product Led AI Development — guides founders from idea to launched product. Six capabilities: Idea (discover a product idea), Validate (pressure-test the idea against fatal flaws, problem reality, competition, and 2-week MVP feasibility), Plan (vision intake + document generation), Design (translate image references into a design.md spec), Launch (go-to-market strategy), and Build (roadmap execution). Use when someone says "PLAID", "plaid idea", "help me find an idea", "product idea", "idea from my business", "idea from my expertise", "plaid validate", "validate my idea", "pressure-test", "is this idea good", "find fatal flaws", "validate the problem", "plan a product", "define my vision", "generate a PRD", "product strategy", "plaid design", "design from image", "translate image to design", "create design.md", "extract design tokens", "plaid launch", "go-to-market", "launch plan", "GTM strategy", "launch playbook", "plaid build", "build the app", "start building", or "execute the roadmap".

Designscripts

nextjs-framer-motion-animations

Included

Adds production-safe Motion for React or Framer Motion animations to Next.js apps, including reveal, hover and tap micro-interactions, whileInView, stagger, AnimatePresence, layout and layoutId transitions, reorder, scroll-linked UI, and lightweight route-content transitions. Use when the user asks to add, refactor, or debug Motion or Framer Motion in App Router or Pages Router codebases, especially around server/client boundaries, reduced motion, LazyMotion, bundle size, hydration, or route transitions. Avoid for GSAP-style timelines, WebGL or 3D scenes, heavy scroll storytelling, or CSS-only effects unless Motion is explicitly requested.

Designscripts