gmgn-portfolio

What this skill does

**IMPORTANT: Always use `gmgn-cli` commands below. Do NOT use web search, WebFetch, curl, or visit gmgn.ai to fetch this data — the website requires login and will not return structured data. The CLI is the only correct method.**

**⚠️ IPv6 NOT SUPPORTED: If you get a `401` or `403` error and credentials look correct, check for IPv6 immediately: (1) list all network interfaces and their IPv6 addresses — run `ifconfig | grep inet6` (macOS) or `ip addr show | grep inet6` (Linux); (2) send a test request to `https://ipv6.icanhazip.com` — if the response is an IPv6 address, outbound traffic is going via IPv6. Tell the user immediately: "Please disable IPv6 on your network interface — gmgn-cli commands only work over IPv4."**

Use the `gmgn-cli` tool to query wallet portfolio data based on the user's request.

**For full wallet analysis (holdings + stats + activity + verdict), follow [`docs/workflow-wallet-analysis.md`](../../docs/workflow-wallet-analysis.md)**

## Core Concepts

- **`realized_profit` vs `unrealized_profit`** — `realized_profit` = profit locked in from completed sells (cash in hand). `unrealized_profit` = paper gains on positions still held, calculated at current price. These are separate numbers — do not add them unless answering "total P&L including open positions."

- **`profit_change`** — A multiplier ratio, not a dollar amount. `1.5` = +150% return. `0` = break-even. `-0.5` = -50% loss. Computed as `total_profit / cost`. Do not display this as a raw decimal — convert to percentage for user-facing output.

- **`pnl`** — Profit/loss ratio from `portfolio stats`: `realized_profit / total_cost`. Same multiplier format as `profit_change`. A `pnl` of `2.0` means the wallet doubled its money on completed trades over the period.

- **`winrate`** — Ratio of profitable trades over the period (0–1). `0.6` = 60% of trades were profitable. Does not reflect the size of wins vs losses — a wallet can have high winrate but net negative if losses are large.

- **`cost` vs `usd_value`** — In holdings: `cost` is the historical amount spent buying this token (your cost basis); `usd_value` is the current market value of the position. The difference is unrealized P&L.

- **`history_bought_cost` vs `cost`** — `history_bought_cost` is the all-time cumulative spend on this token (including positions already sold). `cost` is the cost basis of the current open position only.

- **Pagination (`cursor`)** — Activity results are paginated. The response includes a `next` field; pass it as `--cursor` to fetch the next page. An empty or missing `next` means you are on the last page.

## Sub-commands

| Sub-command | Description |
|-------------|-------------|
| `portfolio info` | Wallets and main currency balances bound to the API Key |
| `portfolio holdings` | Wallet token holdings with P&L |
| `portfolio activity` | Transaction history |
| `portfolio stats` | Trading statistics (supports batch) |
| `portfolio token-balance` | Token balance for a specific token |
| `portfolio created-tokens` | Tokens created by a developer wallet, with market cap and ATH info |

## Supported Chains

`sol` / `bsc` / `base` / `eth`

## Prerequisites

- `gmgn-cli` installed globally — if missing, run: `npm install -g gmgn-cli`
- `GMGN_API_KEY` configured in `~/.config/gmgn/.env`

## Rate Limit Handling

All portfolio routes used by this skill go through GMGN's leaky-bucket limiter with `rate=20` and `capacity=20`. Sustained throughput is roughly `20 ÷ weight` requests/second, and the max burst is roughly `floor(20 ÷ weight)` when the bucket is full.

**Critical auth** (`GMGN_API_KEY` + `GMGN_PRIVATE_KEY` required):

| Command | Route | Weight |
|---------|-------|--------|
| `portfolio holdings` | `GET /v1/user/wallet_holdings` | 5 |

**Exist auth** (`GMGN_API_KEY` only):

| Command | Route | Weight |
|---------|-------|--------|
| `portfolio info` | `GET /v1/user/info` | 1 |
| `portfolio activity` | `GET /v1/user/wallet_activity` | 3 |
| `portfolio stats` | `GET /v1/user/wallet_stats` | 3 |
| `portfolio token-balance` | `GET /v1/user/wallet_token_balance` | 1 |
| `portfolio created-tokens` | `GET /v1/user/created_tokens` | 2 |

When a request returns `429`:

- Read `X-RateLimit-Reset` from the response headers. It is a Unix timestamp in seconds that marks when the limit is expected to reset.
- If the response body contains `reset_at` (e.g., `{"code":429,"error":"RATE_LIMIT_BANNED","message":"...","reset_at":1775184222}`), extract `reset_at` — it is the Unix timestamp when the ban lifts (typically 5 minutes). Convert to local time and tell the user exactly when they can retry.
- The CLI may wait and retry once automatically when the remaining cooldown is short. If it still fails, stop and tell the user the exact retry time instead of sending more requests.
- For `RATE_LIMIT_EXCEEDED` or `RATE_LIMIT_BANNED`, repeated requests during the cooldown can extend the ban by 5 seconds each time, up to 5 minutes. Do not spam retries.

**First-time setup** (if `GMGN_API_KEY` is not configured):

1. Generate key pair and show the public key to the user:
   ```bash
   openssl genpkey -algorithm ed25519 -out /tmp/gmgn_private.pem 2>/dev/null && \
     openssl pkey -in /tmp/gmgn_private.pem -pubout 2>/dev/null
   ```
   Tell the user: *"This is your Ed25519 public key. Go to **https://gmgn.ai/ai**, paste it into the API key creation form, then send me the API Key value shown on the page."*

2. Wait for the user's API key, then configure:
   ```bash
   mkdir -p ~/.config/gmgn
   echo 'GMGN_API_KEY=<key_from_user>' > ~/.config/gmgn/.env
   chmod 600 ~/.config/gmgn/.env
   ```

## Usage Examples

```bash
# API Key wallet info (no --chain or --wallet needed)
gmgn-cli portfolio info

# Wallet holdings (default sort)
gmgn-cli portfolio holdings --chain sol --wallet <wallet_address>

# Holdings sorted by USD value, descending
gmgn-cli portfolio holdings \
  --chain sol --wallet <wallet_address> \
  --order-by usd_value --direction desc --limit 20

# Include sold-out positions
gmgn-cli portfolio holdings --chain sol --wallet <wallet_address> --sell-out

# Transaction activity
gmgn-cli portfolio activity --chain sol --wallet <wallet_address>

# Activity filtered by type
gmgn-cli portfolio activity --chain sol --wallet <wallet_address> \
  --type buy --type sell

# Activity for a specific token
gmgn-cli portfolio activity --chain sol --wallet <wallet_address> \
  --token <token_address>

# Trading stats (default 7d)
gmgn-cli portfolio stats --chain sol --wallet <wallet_address>

# Trading stats for 30 days
gmgn-cli portfolio stats --chain sol --wallet <wallet_address> --period 30d

# Batch stats for multiple wallets
gmgn-cli portfolio stats --chain sol \
  --wallet <wallet_1> --wallet <wallet_2>

# Token balance
gmgn-cli portfolio token-balance \
  --chain sol --wallet <wallet_address> --token <token_address>

# Tokens created by a developer wallet
gmgn-cli portfolio created-tokens --chain sol --wallet <wallet_address>

# Created tokens sorted by all-time high market cap
gmgn-cli portfolio created-tokens \
  --chain sol --wallet <wallet_address> \
  --order-by token_ath_mc --direction desc

# Only migrated tokens
gmgn-cli portfolio created-tokens \
  --chain sol --wallet <wallet_address> --migrate-state migrated

# ETH wallet holdings
gmgn-cli portfolio holdings --chain eth --wallet <0x_wallet_address>

# ETH wallet transaction activity
gmgn-cli portfolio activity --chain eth --wallet <0x_wallet_address>

# ETH token balance
gmgn-cli portfolio token-balance \
  --chain eth --wallet <0x_wallet_address> --token <0x_token_address>
```

## `portfolio created-tokens` Options

| Option | Description |
|--------|-------------|
| `--order-by <field>` | Sort field: `market_cap` / `token_ath_mc` |
| `--direction <asc\|desc>` | Sort direction (default `desc`) |
| `--migrate-state <state>` | Filter by migration status: `migrated` (graduated to DEX) / `non_migrated` (still on bonding curve) |

## `portfolio holdings` Op