storybook-rsbuild
Set up or migrate Storybook to use the Rsbuild builder. Handles fresh setup for React, Vue 3, HTML, Web Components, and React Native Web, migration from webpack5 or Vite frameworks, and integrations with Rslib, Modern.js, and Rspack. Use when asked to add Storybook, migrate Storybook to Rsbuild, configure rsbuildFinal, or integrate Storybook with Rslib/Modern.js/Rspack.
What this skill does
# Storybook Rsbuild ## Goal Set up Storybook on Rsbuild, or migrate an existing Storybook to it. Factual mappings — version compatibility, package names, install commands, config conversion patterns — live in upstream docs at `storybook.rsbuild.rs`. This skill is an action router and a behavioral checklist; it does not duplicate the docs. ## Principles (must follow) 1. **Single source of truth is upstream.** Fetch the relevant `storybook.rsbuild.rs` page for version tables, install commands, and config conversion patterns. Do not infer version pins or package names from training memory — the ecosystem moves faster than the model's prior. 2. **Pin from the framework guide's Requirements table.** Each framework guide page (e.g. `https://storybook.rsbuild.rs/guide/framework/react`) carries a Requirements section listing the canonical compatible version ranges — that is the authoritative source for version pins. For fresh setups, install the latest stable `storybook` major and the matching `storybook-rsbuild` major. Do not pin from version numbers you see in code snippets elsewhere; only the docs are authoritative. 3. **Declare `@rsbuild/core` directly.** `storybook-<framework>-rsbuild` lists `@rsbuild/core` as a peer dependency, but you must still add `@rsbuild/core` to the project's own `devDependencies` so version pins and lockfile audits remain unambiguous and a future framework-package release that drops the peer cannot silently break the build. 4. **Migration is one task with two ordered phases — both required.** Phase A: install the new framework package and update config; leave the old framework package, old builder package, and old `webpackFinal` / `viteFinal` blocks in place so [Verification](#verification) has a rollback path. Phase B: as soon as Verification passes, in the same task, remove the old framework package (e.g. `@storybook/react-webpack5`, `@storybook/vue3-vite`), the old builder package (e.g. `@storybook/builder-webpack5`, `@storybook/builder-vite`), and the old `webpackFinal` / `viteFinal` block. A migration that ends with both builders' framework packages still in `package.json` is incomplete — leaving them is the most common silent regression in this skill's evals. Phase A on its own is not a valid stopping point; if you ran Verification, you must also run cleanup. 5. **Preserve addons; never silently drop.** When migrating, webpack-only addons (e.g. `@storybook/addon-styling-webpack`) must either be passed through `webpackAddons` (so upstream auto-translation handles them) or replaced with the equivalent Rsbuild-native pipeline (`@rsbuild/plugin-postcss`, `tools.postcss`, etc.). A migration that removes a styling addon and produces a passing `storybook build` but a visually broken story tree is still a regression. 6. **Operate in scope.** In monorepos, modify only the package that hosts stories. Do not edit business source files unless the migration strictly requires it. ## Step 1 — Detect scenario Read `package.json` and project structure to determine existing Storybook state: 1. Check for `.storybook/` directory (in monorepos, check both root and per-package) 2. Check `package.json` for `storybook` scripts or `@storybook/*` / `storybook-*-rsbuild` in dependencies or devDependencies 3. If Storybook exists **and already uses `storybook-*-rsbuild`** → already set up; go to [Configuration](#configuration) or [Troubleshooting](#troubleshooting) as needed 4. If Storybook exists **with a non-Rsbuild builder** (`@storybook/*-webpack5`, `@storybook/*-vite`, etc.) → go to [Migration Workflow](#migration-workflow) 5. **No Storybook found** → go to [Fresh Setup Workflow](#fresh-setup-workflow) --- ## Fresh Setup Workflow ### 1. Detect ecosystem integration Read `package.json` dependencies and devDependencies, check in order: | Signal | Ecosystem | Integration guide | | -------------------------------------- | ----------- | -------------------------------------------------------- | | `@rslib/core` | Rslib | https://storybook.rsbuild.rs/guide/integrations/rslib | | `@modern-js/app-tools` | Modern.js | https://storybook.rsbuild.rs/guide/integrations/modernjs | | `@rspack/core` without `@rsbuild/core` | Pure Rspack | https://storybook.rsbuild.rs/guide/integrations/rspack | If matched, read the integration guide and **apply its constraints as an overlay** alongside the steps below. ### 2. Detect UI framework Infer the UI framework from app dependencies (`react`, `vue`, `lit`, etc.): | UI Framework | Framework package | Guide | | ---------------- | ------------------------------------ | ------------------------------------------------------------- | | React | `storybook-react-rsbuild` | https://storybook.rsbuild.rs/guide/framework/react | | Vue 3 | `storybook-vue3-rsbuild` | https://storybook.rsbuild.rs/guide/framework/vue | | Vanilla JS/TS | `storybook-html-rsbuild` | https://storybook.rsbuild.rs/guide/framework/vanilla | | Web Components | `storybook-web-components-rsbuild` | https://storybook.rsbuild.rs/guide/framework/web-components | | React Native Web | `storybook-react-native-web-rsbuild` | https://storybook.rsbuild.rs/guide/framework/react-native-web | ### 3. Set up Storybook 1. In monorepos, operate in the package that will host stories 2. Read and follow the framework guide matched above; install the **latest stable** `storybook` major and the matching `storybook-<framework>-rsbuild` major (Principle 2) 3. Add `@rsbuild/core` to `devDependencies` directly, alongside `storybook-<framework>-rsbuild` (Principle 3) 4. Ensure `.storybook/main.*` uses the correct `framework: '<storybook-*-rsbuild>'` 5. Ensure `package.json` has `storybook dev` and `storybook build` scripts 6. If no story file exists yet, scaffold at least one minimal example story (e.g. `src/stories/Example.stories.*`) so [Verification](#verification) step 2 has something to render 7. Run [Verification](#verification) below ## Migration Workflow Read the upstream migration guide: https://storybook.rsbuild.rs/guide/migration Follow these steps **in order**: 1. **Detect migration type** — read `.storybook/main.*` (`framework` field and/or `core.builder`) and `package.json` dependencies to classify as "from webpack5" or "from Vite", then select the matching section in the migration guide 2. **Resolve version compatibility** — read the "Version compatibility" section in the migration guide, select the correct `storybook-rsbuild` major based on installed Storybook version 3. **Replace packages** — apply the install/remove mapping from the migration guide using the project's package manager (detect from lockfile); only change packages required by the migration. Always add `@rsbuild/core` as a direct devDep alongside the new framework package (Principle 3). Do not remove the old framework package or old devDeps yet — that happens after Verification (Principle 4) 4. **Update `.storybook/main.*`** — apply the config changes exactly as shown in the migration guide for the detected framework 5. **Migrate custom builder hooks** — search for legacy builder hooks (`webpackFinal` / `viteFinal`); if found, convert following the upstream configuration guide (https://storybook.rsbuild.rs/guide/configuration) 6. **Handle addon compatibility** — keep addons unchanged initially. If a webpack-only addon must change, route it through `webpackAddons` for upstream auto-translation, or replace it with the Rsbuild-native equivalent — never silently drop it (Principle 5). Consult the migration guide's addon section for the recommended fix 7. **Verify, then clean up — both required** — run [Verification](#verification) below; once it passes, in the same task complete all
Related in Web Dev
generating-lwc-components
IncludedLightning Web Components with PICKLES methodology and 165-point scoring. Use this skill when the user creates or edits LWC components, builds wire service patterns, or writes Jest tests for LWC. TRIGGER when: user creates/edits LWC components, touches lwc/**/*.js, .html, .css, .js-meta.xml files, or asks about wire service, SLDS, or Jest LWC tests. DO NOT TRIGGER when: Apex classes (use generating-apex), Aura components, or Visualforce.
tanstack-query
IncludedManage server state in React with TanStack Query v5. Set up queries with useQuery, mutations with useMutation, configure QueryClient caching strategies, implement optimistic updates, and handle infinite scroll with useInfiniteQuery. Use when: setting up data fetching in React projects, migrating from v4 to v5, or fixing object syntax required errors, query callbacks removed issues, cacheTime renamed to gcTime, isPending vs isLoading confusion, keepPreviousData removed problems.
document-processor-api
IncludedProcess documents with Nutrient DWS. Use when the user wants to generate PDFs from HTML or URLs, convert Office/images/PDFs, assemble or split packets, OCR scans, extract text/tables/key-value pairs, redact PII, watermark, sign, fill forms, optimize PDFs, or produce compliance outputs like PDF/A or PDF/UA. Triggers include convert to PDF, merge these PDFs, OCR this scan, extract tables, redact PII, sign this PDF, make this PDF/A, or linearize for web delivery.
nutrient-document-processing
IncludedProcess documents with Nutrient DWS. Use when the user wants to generate PDFs from HTML or URLs, convert Office/images/PDFs, assemble or split packets, OCR scans, extract text/tables/key-value pairs, redact PII, watermark, sign, fill forms, optimize PDFs, or produce compliance outputs like PDF/A or PDF/UA. Triggers include convert to PDF, merge these PDFs, OCR this scan, extract tables, redact PII, sign this PDF, make this PDF/A, or linearize for web delivery.
tanstack-query
IncludedManage server state in React with TanStack Query v5. Covers useMutationState, simplified optimistic updates, throwOnError, network mode (offline/PWA), and infiniteQueryOptions. Use when setting up data fetching, fixing v4→v5 migration errors (object syntax, gcTime, isPending, keepPreviousData), or debugging SSR/hydration issues with streaming server components.
accelint-nextjs-best-practices
IncludedNext.js performance optimization and best practices. Use when writing Next.js code (App Router or Pages Router); implementing Server Components, Server Actions, or API routes; optimizing RSC serialization, data fetching, or server-side rendering; reviewing Next.js code for performance issues; fixing authentication in Server Actions; or implementing Suspense boundaries, parallel data fetching, or request deduplication.